As a parking aid and for monitoring rear traffic

RAV-MO-7HD, 7" AHD MONITOR, 3 CAMERA INPUTS, GUIDELINES + RAV-M Full-HD-MINI-SHUTTER REAR-VIEW CAMERA, 1080P, 130°, 9-14V

Functional description:

This extremely robust and high-quality monitor with rubber-coated housing forms a fully-fledged premium reversing video system when combined with the reversing camera with shutter and outstanding Full HD image quality.

3 camera inputs ensure that you have everything in view at all times and that safety is guaranteed. The 3 trigger inputs can be used to switch on the cameras via various triggers, with reversing view always taking priority. Thanks to its built-in loudspeaker, this monitor can reproduce the sounds around the camera in the driver's cab, e.g. during instruction.

The camera is only 78 mm wide and is probably the smallest shutter camera on the market. The ingenious design allows the camera to be installed in any position: overhead on the ceiling, on the wall or on the floor. The camera connection cable is invisible and can be installed completely watertight. The protective flap prevents contamination.

Device information Camera:

• Outstanding resolution: 2,080,000 pixels with 1080 TV lines
• Power supply: DC 9-14V +/- 10%
• Lens detection range: 58° (vertical) / 109° (horizontal) 130° (diagonal)
• Designed according to protection class IP69K, the highest protection standard for vehicle components
• Protection against water with high-pressure cleaners
• Protection against permanent submersion
• Protection against foreign bodies: absolutely dust-tight
• Protection against contact and shocks
• the powder-coated silver die-cast aluminium housing is additionally protected by a corrosion-free sun shield, a motorised shutter and a 2 mm thick, torsion-resistant stainless steel mounting base
• Extremely resistant to branches, high-pressure cleaners, storms, dirt, winter weather and rain
• Waterproof screw connections
• Protective switch-off in the event of blockage by foreign objects
• Image sensor size 700 TVL 1/3 inch Sharp CCD model RJ2341BA0PB
• Image sensor size 1080p 1/2.9 inch Sony CMOS
• Fast image transmission in real time
• 6 infrared LEDs of the highest quality guarantee a very good image even in the dark
• Night vision up to 12 metres
• Light sensitivity: 0 lux (with IR at night), 0.1 lux (during the day)
• Vibration-resistant up to 5G (700TVL) / up to 10G (1080p)
• shock resistant up to 80G
• built-in microphone
• Heating against condensation: active below 10° Celsius
• the camera image can be mirrored
• automatic backlight compensation
• automatic brightness and white balance
• TV system: PAL (NTSC available on request)
• anti-fog lotus coating
• Focal length: f=2.8 mm (700TVL) / f=3.6 mm (1080p)
• Sensor detection range: 4.9 mm (H) x 3.7 mm (V)
• Power consumption: < 2.5 W
• No power connection required at the rear of the vehicle
• Video signal output: 1 Vp-p, 75 Ohm
• Power consumption during operation: 88 mA during the day, 128 mA at night, maximum: 535 mA
• Operating temperature range: -20° C to 70° C, max. relative humidity 95%
• Standing temperature range: -40° C to 80° C, max. relative humidity 95%
• Scanning system: 2:1 interlace 700TVL / progressive 1080p
• Synchronisation: internal
• Horizontal synchronisation frequency: 15.63 kHz / 15.73 kHz
• Vertical synchronisation frequency: 50 Hz / 60 Hz
• Gamma: 0.45
• Gain control: automatic
• Signal-to-noise ratio: 48 dB 700TVL / 52 dB 1080p
• Electronic shutter speed: 1/50 (PAL) ~ 1/100,000 s

Device information Monitor:

• 7" AHD LCD monitor with 3 camera inputs
• Integrated loudspeaker Audio signals from a reversing camera can be played back via loudspeaker
• For all analogue and digital PAL and NTSC cameras, including full HD cameras, 3 HD inputs (720P 25/30Hz, 720P 50/60Hz, 1080P 25/30Hz)
• Resolution: 1024 x 600 pixels
• Operating voltage 9 32 V DC
• Rubberised, haptically very pleasant monitor housing
• Metal base with ball joints at the top and bottom for optimum horizontal and vertical alignment (matching vehicle-specific dashboard brackets are optionally available)
• 3 inputs for automatically switching on the monitor, e.g. reversing lights, indicators, implements or dashboard switch (reversing light input has priority)
• Guidelines for better estimation of distances (can be switched on/off)
• ACC time: Delay hold time of the reversing camera image after switching off the signal on the reversing light cable. Setting options: Off, 1 15 s
• Sleep/timer function: automatic switch-off of the monitor after 0 100 min, adjustable in 10 min increments
• Cameras can be mirrored for front/rear use or left/right mounting, display of the left or right mirror image can be selected in each channel
• Menu languages: English, German, French, Italian, Spanish
• OSD setting options for brightness, contrast, colour saturation and volume
• Optionally available adapters for standard pre-installed camera cables from brands such as Orlaco, Dometic, Brigade, Axion, Mekra and Car Guard Systems (including old models)
• Picture format: 16:9
• Brightness: 350 cd/m2
• Horizontal viewing angle: left: 70°, right: 70°
• Vertical picture angle: top: 50°, bottom: 70°
• Maximum power consumption: 5W
• Operating temperature range: -20°C to 70°C
• Standing temperature range: -30°C to 80°C

Product dimensions and weight Monitor

• Dimensions with sun visor: H: 195mm/ W: 114mm/ D: 55mm
• Weight: 450g

Product dimensions and weight Camera

• Length: 77.9 mm, width: 71.3 mm, height: 70 mm
• Weight: 360g

Logistics and packaging:

• Item number: RUMO7173AB06
• EAN: 4260456386493
• Packaging dimensions: H: 305mm/ W: 202mm/ D: 176mm
• Packaging weight: 2658g

Certificates:

• IP69K Waterproof and dust resistance test for the camera (for high pressure/vapour jet cleaning, specific for road vehicles)
• Salt vapour test
• ROHS
• CE
• E-Mark

Scope of delivery:

• 1 x monitor (item no. RUMO7173A)
• 1 x connection cable harness (art. no. RUERMO7173A-001)
• 1 x remote control (art. no. RUERMO7173A-002)
• 1 x monitor metal base with 2 ball joints (item no.: RUERMO7232A-001)
• 4 x self-tapping screws
• 1x colour reversing camera
• 1x 20 m extension cable with 4-pin CGS screw connectors (item no.: RUVKA20)
• 1x rubber sealing plate for the mounting base
• 1x sealing ring for the cable gland
• 6x screw set for fastening to the vehicle (2x for sheet metal/ 2x for PVC/ 2x with thread)
• 1 x installation and operating instructions